Differences

This shows you the differences between two versions of the page.

--- tutorial:torque [2017/04/04 22:38]
jild13 [Advanced]
+++ tutorial:torque [2017/04/08 14:57]
sertalpbilal [Options] Exported options into a table
@@ Line 66: / Line 66: @@
 ===== Options =====
-  * ''-q <queue>'' set the queue. Often you will use the standard queue, so no need to set this up.
+^ Option  ^ Description  ^
-  * ''-V'' will pass all environment variables to the job
+| ''-q <queue>''  | Set the queue. Often you will use the standard queue, so no need to set this up. |
-  * ''-v var[=value]'' will specifically pass environment variable 'var' to the job
+| ''-V''  | Will pass all environment variables to the job |
-  * ''-b y'' allow command to be a binary file instead of a script.
+| ''-v var[=value]''  | Will specifically pass environment variable 'var' to the job |
-  * ''-w e'' verify options and abort if there is an error
+| ''-b y''  | Allow command to be a binary file instead of a script. |
-  * ''-N <jobname>'' name of the job. This you will see when you use qstat, to check status of your jobs.
+| ''-w e''  | Verify options and abort if there is an error |
-  * ''-l resource_list'' specify resources
+| ''-N <jobname>''  | Name of the job. This you will see when you use qstat, to check status of your jobs. |
-  * ''-l h_rt=<hh:mm:ss>'' specify the maximum run time (hours, minutes and seconds)
+| ''-l resource_list''  | Specify resources |
-  * ''-l s_rt=hh:mm:ss'' specify the soft run time limit (hours, minutes and seconds) - Remember to set both s_rt and h_rt.
+| ''-l h_rt=<hh:mm:ss>''  | Specify the maximum run time (hours, minutes and seconds) |
-  * ''-cwd'' run in current working directory
+| ''-l s_rt=hh:mm:ss''  | Specify the soft run time limit (hours, minutes and seconds) - Remember to set both s_rt and h_rt. |
-  * ''-wd <dir>'' Set working directory for this job as <dir>
+| ''-cwd''  | Run in current working directory |
-  * ''-o <output_logfile>'' name of the output log file
+| ''-wd <dir>''  | Set working directory for this job as <dir> |
-  * ''-e <error_logfile>'' name of the error log file
+| ''-o <output_logfile>''  | Name of the output log file |
-  * ''-m ea'' Will send email when job ends or aborts
+| ''-e <error_logfile>''  | Name of the error log file |
-  * ''-P <projectName>'' set the job's project
+| ''-m ea''  | Will send email when job ends or aborts |
-  * ''-M <emailaddress>'' Email address to send email to
+| ''-P <projectName>''  | Set the job's project |
-  * ''-t <start>-<end>:<incr>'' submit a job array with start index , stop index in increments using
+| ''-M <emailaddress>''  | Email address to send email to |
+| ''-t <start>-<end>:<incr>''  | Submit a job array with start index , stop index in increments using |
-See [[http://gridscheduler.sourceforge.net/htmlman/htmlman1/qsub.html|THIS]] for more details
+You can find detailed information [[http://gridscheduler.sourceforge.net/htmlman/htmlman1/qsub.html|here]].
 ===== Monitoring and Removing jobs =====

Lehigh ISE / COR@L Lab Wiki

User Tools

Site Tools

Differences

Page Tools